Fasteners for use with SpiderLath

Attachment Methods

Grip-Plate® washers with Grip-Deck® screws

  • For proper attachment of SpiderLath to either wood or steel substrates use 1 ¼" diameter Grip-Plate® washers with quality Grip-Deck® screws.
  • Grip-Plate® washers compress and flatten on the surface of the SpiderLath while the foam gasket effectively seals the screw penetration against air and moisture.
  • Washers are manufactured in the USA using high-quality galvanized steel for superior corrosion resistance.

Grip-Lok® auto-feed fastening system

  • For rapid attachment of SpiderLath use our patent pending Grip-Lok® auto-feed fastening system. Use to rapidly attach lath to either wood or steel studs (even heavy 12 gauge steel).
  • The magnetic nose cup holds the washer in place during application. This creates a "third hand" so that the operator can better focus on balance, fastener placement, speed, and consistency.
  • The Grip-Lok® auto-feed fastening system uses SpiderLath recommended 1 ¼" dia. Grip-Plate® washers with 3" or shorter collated screws. This system is sold as a package that includes the auto-feed screw gun, magnetic nose cup adaptor (patent pending), Grip-Plate® washers, and GripDeck® collated screws to meet your project requirements.

Product Specifications

Grip-Plate® washer fasteners

  • Large 1 ¼” diameter provides excellent holding power
  • Flattens on surface of SpiderLath for flush troweling surface
  • Compresses on the SpiderLath and foam strip to help seal the screw penetration against air and moisture
  • Can be installed with bulk screws or with Grip-Lok® auto-feed system for rapid attachment
  • Packaged in 1,000 or 5,000 count boxes from Rodenhouse Inc.

Grip-Lok® auto-feed fastening system

  • Fastest method of attachment to either wood or steel studs
  • Adjustable depth control to ensure proper washer compression
  • Package includes our Grip-Lok® nose cup adaptor with various auto-feed screw guns
  • Can be utilized with collated Grip-Deck screws (see below)
  • For select tools from Tyrex, Senco, Super-Drive, Quik-Drive, Pam, ITW Ramset, Aerosmith, etc.

Plasti-Grip® PMF fasteners for concrete/masonry substrates:

  • Solid plastic construction virtually eliminates thermal bridging and corrosion associated with screws
  • Simply pre-drill with 5/16” masonry bit and hammer to secure SpiderLath and/or foam insulation
Available Lengths Pieces / Carton Part No.
2” PMF for insulation thickness of ½” – ¾” 250 pcs./carton PMF 2”/250
2 ¾” PMF for insulation thickness of 1” – 1 ½” 250 pcs./carton PMF 2 ¾”/250
3 ½” PMF for insulation thickness of 1 ½” – 2” 250 pcs./carton PMF 3 ½”/250
4 ½” PMF for insulation thickness of 2 ½” - 3” 250 pcs./carton PMF 4 ½”/250
5 ⅜” PMF for insulation thickness of 3 ½” - 4” 200 pcs./carton PMF 5⅜”/200

Grip-Deck® collated screws for patent-pending Grip-Lok® auto-feed system

  • Lengths available from 1 ¼” – 3” in self-drilling or coarse thread for steel or wood studs
  • Clear zinc coating for standard corrosion protection meets or exceeds ASTM-B-117
  • Specialty coatings are available for added corrosion protection (ACQ)
  • Self-drilling screws manufactured to meet or exceed ASTM-C-954-86
  • Manufactured in facilities that comply with ISO-9002 standards

Grip-Deck® Bulk screws

  • Lengths available from 1 ¼” – 5” in self-drilling or coarse thread for steel or wood studs
  • Clear zinc coating for standard corrosion protection meets or exceeds ASTM-B-117
  • Use with 1 ¼” Grip-Plate metal washers for SpiderLath recommended fastening
  • Specialty coatings are available for added corrosion protection (ACQ)
  • Self-drilling screws manufactured to meet or exceed ASTM-C-954-86
  • Manufactured in facilities that comply with ISO-9002 standards